Voltage | 120 V |
---|---|
Frequency | 60 Hz |
Phase | N/A |
Current | 1 A |
Airflow High | 170 CFM |
Static Pressure | 0 IN. WG |
Weight | 75 lb |
Drain | No |
Motors and Blowers | two independent motorized impellers |
---|---|
Core | Energy recovery core (ERV) is a crossflow exchanger that incorporates a selective membrane for moisture transfer without allowing cross contamination of the air streams. Used for balanced mechanical ventilation in humid environments to reduce air conditioning (AC) energy cost. Water condensation by the AC is reduced by allowing water vapor from fresh air stream to migrates across the membrane into the exhaust stream. In colder climates, moisture transfer is reverse and the unit helps to moderate humidity and the core is a highly efficient heat exchanger. Each core is tested to ensure low leakage. |
Defrost | Recirculating |
Serviceability | Latched door to allow easy access to core and filters for cleaning. 25" clearance recommended. |
Case | 20GA pre paint galvanized steel |
Insulation | 3/4" foil face Styrofoam |
Filters | Washable on supply and exhaust |
Mounting | Typically hung with supplied strap and hook kit. |
**PLEASE NOTE: This product has been marked for end-of-life and will be available for purchase until October 31, 2018. Please see our recommenced replacement – 170 ERVD**
**PLEASE NOTE: This product has been marked for end-of-life and will be available for purchase until October 31, 2018. Please see our recommenced replacement – 170 ERVD**
Included
Optional
-
Timer - DET01
-
Basic Wall Control - BC02
-
Basic Wall Control - BC03
-
Basic Wall Control - BC04
-
Digital Wall Control - DXPL02
-
Wireless Timer - DET02
-
EasyAir Grilles - Kitchen Grille
-
EasyAir Grilles - Quick Mount Fittings
-
EasyAir Grilles - Stack Head Elbow
-
EasyAir Grilles - Suspended Ceiling Fitting
-
EasyAir Grilles - TechGrille
-
EasyAir Grilles - Terminator Diffuser
-
Ventilation Accessories - Weatherhood Kits